Bunting Bearings, LLC EP141812 Plain Sleeve & Flanged Bearings

lubrication type:Lubrication Fitting; overall height:8.2188 in; replacement bearing:UKX17+HE2317; expansion type:Non-Expansion Bearin; base width:4-3/8 in; seal type:Contact with Slinger; housing material:Cast Iron; duty type:Medium Duty; series:UKPX00+HE2000; B:4-3/8 in;

duty type:Normal Duty; mounting:Two-Bolt Base; B:1.61 in; radial static load capacity:2538 lb; expansion type:Non-Expansion Bearin; bore type:Round; manufacturer catalog number:129177; series:206 (GTU); D:4-1/4 to 5 in; base to bore centerline:1.6900 in;

bore type:Round; operating temperature range:-20 to +225 &de; d:1.2500 in; radial dynamic load capacity:5759 lb; duty type:Normal Duty; manufacturer catalog number:129298; series:207; overall height:3.8200 in; D:3-1/4 in; base width:1.89 in;

inner ring width:1.2188 in; series:ER; maximum rpm:13400 RPM; locking device:Concentric Collar; outer ring width:0.6250 in; seal type:Contact with Flinger; bearing material:Cast Iron; bore type:Round; radial dynamic load capacity:2210 lb; d:0.5000 in;

D:110 mm; d:40 mm; cage material:Pressed Steel; bore type:Straight; B:27 mm; number of rows:1; manufacturer upc number:029176069871; closure type:Open;

base to bore centerline:3.2500 in; overall length:10.4375 in; seal type:Triple Lip; d:3.0000 in; radial static load capacity:53000 lb; maximum rpm:2250 RPM; finish/coating:Uncoated; B:3-1/2 in; housing construction:Solid Pillow Block; mounting:Two-Bolt Base;

rs min:1 mm; Fatigue limit load, Cu:0.3 kN; Mass:0.11 kg; Radial clearance class:CN; D:47 mm; Brand:SNR; Nlim:26,000 rpm; Dynamic load, C:13.5 kN; ra max:1 mm; f0:12.3;

d:320 mm; bearing material:Steel; fillet radius:4 mm; outer ring width:150 mm; dynamic load capacity:3550000 N; precision rating:Not Rated; series:222; B:150 mm; outer ring type:Not Split; D:580 mm;

snap ring included:Without Snap Ring; internal clearance:C2; fillet radius:0.6 mm; cage material:Steel; bore type:Round; closure type:Double Shielded; finish/coating:Uncoated; series:62; manufacturer product page:Click here; bearing material:Steel;

da max:54 mm; Mass (without HJ ring):0.54 kg; d:45 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; r1a max:1 mm; Fatigue limit load, Cu:10.3 kN; ra max:1 mm; Nlim (grease):6,800 rpm; B:23 mm; Characteristic rolling element frequency, BSF:5.79 Hz;

inside diameter:7.5000 in; axial static load capacity:11020 lbf; B:0.5000 in; axial dynamic load capacity:6060 lbf; maximum rpm:1500 RPM; fillet radius:0.6 in; bearing material:Steel; D:8.5000 in; radial dynamic load capacity:2430 lbf; standards met:MIL-PRF-3150, AISI 5;

stud type:Standard; maximum rpm:3100 rpm; roller material:Chrome Steel; series:Metric CAMROL (; stud diameter:24 mm; lubrication hole location:Stud Side; finish/coating:Black Oxide; bearing element:Needle Rollers; closure type:Open; roller width:29 mm;

static load capacity:54800 lbf; bearing material:Chrome Steel; finish/coating:Uncoated; dynamic load capacity:46600 lbf; compatible cup:612, 612-S, 612B; abma precision rating:Class 2; inner ring width:1-5/8 in; manufacturer upc number:053893070704; d:2.2500 in; series:615;

lubrication type:Zerk Fitting; race material:Brass; rod end type:Male Threaded; d:0.5000 in; housing material:Carbon Steel; ball material:Case Hardened Carbon; grade:Commercial; thread direction:Right Hand;